Upload Trace-Log - Dell Z9500 Reference Manual

Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series

upload trace-log

Upload a trace log file from a Z9500 CPU.
Z9500
Syntax
upload trace-log {rp | linecard slot-id} {cmd-history | hw-
trace | sw-trace}
Parameters
rp
linecard slot-id
cmd-history
hw-trace
sw-trace
Defaults None.
Control and Monitoring
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
Enter the keyword rp to upload a trace log from the Route
Processor CPU.
Enter the linecard slot-id parameters to specify the
line-card CPU whose trace log you want to upload.
Enter the keyword cmd-history to upload the command
history from the specified CPU.
Enter the keyword hw-trace to upload the hardware trace
log from the specified CPU.
Enter the keyword sw-trace to upload the software trace
log from the specified CPU.
175