System Location-Led - Dell Z9500 Reference Manual

Related
•
Commands
•

system location-led

Toggle the location LED of the chassis and (optionally) the location LED of a specified Z9500 port on or
off.
Z9500
Syntax
system location-led [interface {fortyGigE | tengigabitethernet}
slot/port] {on | off}
Parameters
interface
{fortyGigE |
tengigabitether
net}
slot / port
on |off
Defaults The location LEDs of the chassis and Z9500 ports are turned off.
Command EXEC
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
Usage Use the system location-led command to locate the chassis and (optionally) a
Information port on the I/O side of the Z9500 chassis. The location LED setting is not saved
through power cycles.
Control and Monitoring
util-threshold mem – Configure memory utilization thresholds.
util-threshold cpu – Configure CPU utilization thresholds.
Specify the port type: 40-Gigabit Ethernet or 10-Gigabit
Ethernet.
Enter the slot and port number. The range of Z9500 slot
numbers is 0 to 2.
Turn the location LEDs of the chassis and a specified port on
or off.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
169