Cam-Audit Linecard; Clear Alarms - Dell Z9500 Reference Manual

cam-audit linecard

Enable audit of the IPv4 forwarding table on all line cards.
Z9500
Syntax
cam-audit linecard all ipv4-fib interval time-in-minutes
Parameters
all
ipv4-fib
interval time-
in-minutes
Defaults Disabled
Command CONFIGURATION
Modes
Command
Version
History
9.2(1.0)
7.4.1.0
Usage Enables periodic audits of the software and hardware copies of the IPv4 forwarding
Information table.

clear alarms

Clear alarms on the system.
Z9500
Syntax
clear alarms
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
Control and Monitoring
Enter the keyword all to enable CAM audit on all line cards.
Enter the keyword ipv4-fib to designate the CAM audit on
the IPv4 forwarding entries.
Enter the keyword interval followed by the frequency in
minutes of the CAM audit. Range: 5 to 1440 minutes (24
hours). Default: 60 minutes.
Description
Introduced on the Z9500.
Introduced on the E-Series.
Description
Introduced on the Z9500.
93