Ftp-Server Username - Dell Z9500 Reference Manual

ftp-server username

connections.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Z9500
Syntax
ftp-server username username password [encryption-type]
password
To delete a user name and its password, use the no ftp-server username
username command.
Parameters
username
password
password
encryption-
type
Defaults Not enabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
Control and Monitoring
— sets a username and password for incoming FTP
Enter a text string up to 40 characters long as the user name.
Enter the keyword password then a string up to 40
characters long as the password. Without specifying an
encryption type, the password is unencrypted.
(OPTIONAL) After the keyword password, enter one of the
following numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
107