Bgp Asnotation - Dell Z9500 Reference Manual

bgp asnotation

Allows you to implement a method for AS number representation in the command line interface (CLI).
Z9500
Syntax
bgp asnotation [asplain | asdot+ | asdot]
To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgp
asnotation command.
Defaults asplain
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
8.2.1.0
Usage
Before enabling this feature, enable the enable bgp four-octet-as-
Information
supportcommand. If you disable the four-octect-support command after
using dot or dot+ format, the AS numbers revert to asplain text.
When you apply an asnotation, it is reflected in the running-configuration. If you
change the notation type, the running-config updates dynamically and the new
notation shows.
Example
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot
Dell(conf-router_bgp)#ex
Dell(conf)#do show run | grep bgp
router bgp 1
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot+
Dell(conf-router_bgp)#ex
Dell(conf)#do show run | grep bgp
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced the dynamic application of AS notation changes
Introduced
bgp four-octet-as-support
bgp asnotation asdot
343