Dell Z9500 Reference Manual page 226

Version
8.3.1.0
8.2.1.0
8.1.1.0
6.5.1.0
Usage
Use the order option only when you use policy-based QoS on the switch. For
Information
more information, refer to the Quality of Service chapter of the Z9500
Configuration Guide.
When you use the log option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP
may become busy as it has to log these packets' details.
Use the monitor option only when you are using flow-based monitoring. For
more information, refer to the Port Monitoring chapter of the Z9500 Configuration
Guide.
ICMP Message
Type Keywords
administratively-
prohibited
alternate-address
conversion-error
dod-host-
prohibited
dod-net-
prohibited
echo
echo-reply
general-
parameter-
problem
host-isolated
host-precedence-
unreachable
host-redirect
226
Description
Added the keyword dscp.
Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
Introduced on the E-Series ExaScale.
Expanded to include the optional QoS order priority for the
ACL entry.
NOTE: When ACL logging and byte counters are configured simultaneously,
byte counters may display an incorrect value. Configure packet counters with
logging instead.
ICMP Message Type Name
Administratively prohibited
Alternate host address
Datagram conversion error
Host prohibited
Net prohibited
Echo
Echo reply
Parameter problem
Host isolated
Host unreachable for precedence
Host redirect
Access Control Lists (ACL)