Dell Z9500 Reference Manual page 438

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following describes the show ip bgp filter-list hello command

shown in the following example.

Dell#show ip bgp filter-list hello

BGP table version is 80227, local router ID is 120.1.1.1

Status codes: s suppressed, d damped, h history, * valid, >

Path source: I - internal, a - aggregate, c - confed-external,

r - redistributed, n -

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Lists the path sources shown to the right of the last AS

number in the Path column:

i = internal route entry

a = aggregate route entry

c = external confederation route entry

n = network route entry

r = redistributed route entry

Displays the next hop address of the BGP router. If 0.0.0.0 is

listed in this column, then local routes exist in the routing

Displays the BGP route's metric, if assigned.

Displays the BGP LOCAL_PREF attribute for the route.

Displays the route's weight.

Lists all the ASs the route passed through to reach the

destination network.

Border Gateway Protocol