Bgp Dampening - Dell Z9500 Reference Manual

...as-number
Defaults Not configured.
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage
All the routers in the Confederation must be 4 byte or 2 byte identified routers. You
Information
cannot mix them.
The autonomous systems configured in this command are visible to the EBGP
neighbors. Each autonomous system is fully meshed and contains a few
connections to other autonomous systems.
After specifying autonomous systems numbers for the BGP confederation, recycle
the peers to update their configuration.
This command automatically restarts the BGP instance for the configuration to
take effect.
Related
bgp confederation identifier
Commands
bgp four-octet-as-support

bgp dampening

Enable BGP route dampening and configure the dampening parameters.
Z9500
Syntax
bgp dampening [half-life reuse suppress max-suppress-time]
[route-map map-name]
Border Gateway Protocol
(OPTIONAL) Enter up to 16 confederation numbers. The
range is from 0 to 65535 (2 byte), from 1 to 4294967295 (4
byte), or from 0.1 to 65535.65535 (dotted format).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series. Added support for the 4-byte
format.
— configures a confederation ID.
— enables 4-byte support for the BGP process.
351