Banner Exec - Dell Z9500 Reference Manual

Usage You must save the configuration and reload the system to implement ASF. When
Information you enter the command, the system sends a message stating that the new mode is
enabled when the system reloads.

banner exec

Configure a message that is displayed when your enter EXEC mode.
Syntax
banner exec c line c
To delete a banner, use the no banner exec command.
Parameters
c
line
Defaults No banner is displayed.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage After entering the banner login command, type one or more spaces and a
Information delineator character. Enter the banner text then the second delineator character.
When the user is connected to the router, if a message of the day banner is
configured, it displays first. If no message of the day banner is configured, the login
Control and Monitoring
Enter the keywords banner exec, then enter a character
delineator, represented here by the letter c. Press ENTER.
Enter a text string for your banner message ending the
message with your delineator. In the following example, the
delineator is a percent character (%); the banner message is
"testing, testing".
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original Command
87