File Management; Boot System - Dell Z9500 Reference Manual

File Management

This chapter contains command line interface (CLI) commands needed to manage the configuration files
as well as other file management commands.
The commands in this chapter are supported by the Dell Networking OS on the Z9500 switch.

boot system

Specify the location where the Dell Networking OS image used to boot the system is stored.
Z9500
Syntax
boot system {gateway ip address | {default | primary |
secondary} {system {A: | B:} | tftp: | ftp:}
To return to the default boot sequence, use the no boot system command.
Parameters
gateway
ip-address
default
primary
secondary
system A: | B:
tftp:
ftp:
Defaults Not configured.
Command CONFIGURATION
Modes
62
Enter the IP address of the default next-hop gateway for the
management subnet.
Enter an IP address in dotted decimal format.
Enter the keyword default to use the default Dell
Networking OS image.
Enter the keyword primary to use the primary Dell
Networking OS image.
Enter the keyword secondary to use the secondary Dell
Networking OS image.
Enter A: or B: to boot one of the system partitions.
Enter the keyword TFTP: to retrieve the image from a TFTP
server: tftp://host-ip/filepath.
Enter the keyword FTP: to retrieve the image from an FTP
server: ftp://userid:password @host-ip/filepath.
3
File Management