Chapter 6: Setting Regarding Cutting Quality; To Cut The Corner Of ThCk MedA Sharply - GRAPHTEC CE6000-120AP User Manual

Chapter 6:
Setting Regarding Cutting Quality
When actually plottng (cuttng), there may be stuatons where t's not possble to plot (cut) deally, or where lnes
are slghtly off, corners are deformed, or uncut paper remans as a result of the characterstcs of the meda (ts
thckness or hardness) or the condton of the blade. Adjust the movement speed and the pressure on the tool and
the control method n order to avod ths problem.
Ths chapter explans the settngs for the qualty of these types of plots (cuts).
PRODUCT SUMMARY
6.1 To cut the corner of thick media sharply
6.2 Setting the Step Pass
6.3 Setting the Offset Angle
6.4 Setting the Distance Adjust
6.5 Setting Initial Blade Control Position Adjust
6.6 Settings for OFFSET FORCE
6.7 Blade Wear Detection
6.8 Adjust the space between tools 1 and 2
6-1