Setting The Cutting Direction - GRAPHTEC FC8000 SERIES User Manual

3 -
4

Setting the Cutting Direction

Rotate the coordinate axes to change the cutting direction.
<For rear loading/sheet>
Y
X
Coordinate axes rotation settings on
Coordinate axes rotation settings off
Y
X
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the [3] key (AREA).
AREA PARAMETERS setting screen (1/2) is displayed.
3
Press the [3] key (ROTATE).
ROTATE screen is displayed.
4
Press the [1] key (ON) or the [2] key (OFF).
Next page
<For front loading>
3-10
X
Coordinate axes rotation settings off
Coordinate axes rotation settings on
X