Pre Feed Of Media (Paper Or Marking Film) - GRAPHTEC CE7000 Series User Manual

2.9

Pre Feed of Media (Paper or Marking Film)

The PRE FEED function is used to prevent the loaded media from slipping by automatically advancing the media
the specified length and imprinting it with grit roller marks. This function can also be used to acclimate long media
lengths to the operating environment in order to minimize media expansion and contraction, and to ensure stable
media feed operations.
When performing plotting/cutting longer than 2 m in CE7000-60/130/160, be sure to use a basket (option).
Operation
1
Press the [PAUSE/MENU] key in READY status.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETING screen (1/2) is displayed.
3
Press the [1] key (PRE FEED).
FEED LENGTH setting screen is displayed.
4
Press the POSITION (
setting value.
5
Confirm the setting and press the [ENTER] key.
Pre feed will start, and it will return to MEDIA SETTING screen (1/2) .
6
Press the [PAUSE/MENU] key.
It will return to default screen.
) keys and increase or decrease the
2-39
Supplement
•
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the [ESC] key (CANCEL).
•
Press the [SLOW] key to select the setting
digits.
•
You can set the range between 0.5 m and 50
m.
•
When you select "SHEET" for paper feeding,
pre feed will be not performed.
Supplement
When Pre Feed of Media is performed, the
following screen is displayed.
To cancel Pre Feed, press the [SLOW] key
(CANCEL).