Electrical Adjustments; Flowchart Of The Adjustment Sequence - GRAPHTEC Cutting PRO FC2230 Series Service Manual

7. ELECTRICAL ADJUSTMENTS

7.1 Flowchart of the Adjustment Sequence

Flowchart of the Adjustment Sequence for 1- and 2-pen Specifications of FC2231 and FC2232.
7.3 Switching the Power Unit's Supply Voltage
7.4 Power Unit
7.6 Clearing the Non-Volatile RAM
7.7 Default Trimmer Settings
7.8 Adjusting the Motor Offset
7.9 Adjusting the Pen Offset
7.10 Adjusting the Pen Servo
7.11 Adjusting the Pen Force
7.12 Adjusting the Main Servo Axes GAIN
( 2-pens only )
7.13 Adjusting the Pen Interval
7.14 DIP Switch Factory Settings
7.15 Factory Preset Settings
End of Adjustment
FC2230-UM251-01-1600 7-1