Chapter 2 Monitor Link Configuration Commands; Monitor Link Configuration Commands; Display Monitor-Link Group - H3C S3100 Series Command Manual

Command Manual (For Soliton) – Smart Link-Monitor Link
H3C S3100 Series Ethernet Switches

Chapter 2 Monitor Link Configuration Commands

2.1 Monitor Link Configuration Commands

2.1.1 display monitor-link group

Syntax
display monitor-link group { group-id| all }
View
Any view
Parameter
group-id: Monitor Link group ID, ranging 1 to 24.
all: Specifies all the Monitor Link groups.
Description
Use the display monitor-link group command to display Monitor Link group
information.
Example
# Display the information about Monitor Link group 1.
<Sysname> display monitor-link group 1
Monitor link group 1 information:
Member
----------------------------------------------------------------------
SMLK-2
AGG-1
Table 2-1 Description on the fields of the display monitor-link group command
Member
Role
Status
Last-up-time
Last-down-time
Role Status
UPLINK UP
DOWNLINK UP
Field
Member of the Monitor Link group
Role of Monitor Link group member port: UPLINK or
DOWNLINK
Status of Monitor Link group member port: UP or DOWN
Last time the port is up
Last time the port is down
Chapter 2 Monitor Link Configuration
Last-up-time
16:37:20 2006/4/21
Description
2-1
Commands
Last-down-time
16:37:20 2006/4/20