Part Checklist; Installation - Talkswitch TS-400 User Manual

Hide thumbs Also See for TS-400:

Table of Contents

PART CHECKLIST

The following parts are included with your TS-400 phone:

• TS-400 telephone

• Telephone base

• Telephone handset

1. Plug one end of the flat telephone

line cord into the line jack on the

back of the phone where it is labeled

TEL.LINE and plug the other end into

your modular telephone wall jack.

2. Connect the AC adapter to an electrical

wall outlet and then connect the

AC adapter plug to the DC 9V/12V

jack on the back of the phone. Use

only the power adapter provided with

your phone.

3. Connect one end of the coiled Handset Cord to the jack on the left side of the phone and

connect the other end of the coiled Handset Cord to the jack on the handset.

4. If you wish to use an Answering Machine, Modem, Fax Machine or other devices

along with your Caller ID telephone, you may plug one of these devices into the

DATA jack on the right side of the phone. The important thing to remember is that

for the Caller ID features to work properly the Caller ID telephone must be plugged

directly into the wall jack and other devices must be plugged into the Caller ID

phone.

H T T P : / / G LO B A L .T A L K S W I T C H . C O M

T S - 4 0 0 U S E R G U I D E

• Line and handset cord

• AC/DC adapter

• User Guide

Table of Contents