Phone Settings; Lcd Contrast; Ring Settings - Talkswitch TS-350i Start Manual

Phone Settings

Under the Phone Settings menu, the following parameters can be altered.

— LCD Contrast

— Ring Settings

— Disable Ringer
— Headset Auto Mode
— Flexible Key Settings
— Time Configuration
— Firmware Update
— Outgoing Call Lock
— Speed Dial Number
— Key Tone
— Language
LCD Contrast
The contrast of the LCD is adjustable for best viewing angle.
To adjust the LCD contrast:
• Press the
• Press the digit, or move the cursor to 3. Phone Settings using the Down softkey
and press the Select softkey.
• Press the digit, or move the cursor to 1. LCD Contrast using the Down softkey and
press the Select softkey.
• Press the Down softkey to decrease the contrast, or
press the Up softkey to increase the contrast.
• To configure another parameter, press the Back
softkey to continue or press the
the configuration menu.
Ring Settings
The IP phone has 9 ring tones and a no ring (Disable Ringer) option for incoming call
notification. There is also the option to assign each phone book record one of the ring
tones for inbound calls. The Default Ring Tone is used when a ring tone is Set as Default or
not defined for a line or phone book record.
In quieter environments, it might be useful to delay the ring signal on incoming calls.
Ringing can be delayed by up to 10 seconds. The LED light associated to your extension
will flash immediately for all incoming calls.
E V E R Y C A L L C O U N T S
button.
button to exit
9