Master Key Actions; Reasons Master Keys Can Be Disabled; Saving The Master Key To A File - Brocade Communications Systems Brocade 8/12c User Manual

Master key actions

NOTE
Master keys belong to the group and are managed from Group Properties.
Master key actions are as follows:
•
•
•

Reasons master keys can be disabled

Master key actions are disabled if unavailable. There are several ways a master key can be
disabled:
•
•

Saving the master key to a file

Use the following procedure to save the master key to a file.
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Backup Master Key as the Master Key Action.
Brocade Network Advisor SAN User Manual
53-1002167-01
Backup master key, which is enabled any time a master key exists.
You can back up the master key to a file, to a key vault, or to a smart card. You can back up the
master key multiple times to any of these media in case you forget the passphrase you
originally used to back up the master key, or if multiple administrators each needs a
passphrase for recovery.
Restore master key, which is enabled when no master key exists or the previous master key
has been backed up.
Create new master key, which is enabled when no master key exists or the previous master key
has been backed up.
The user does not have Storage Encryption Security permissions. For more information, see
"Encryption user privileges"
The group leader is not discovered or managed by the Management application.
The Encryption Center dialog box displays
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Master Key Backup dialog box displays
been generated.
on page 429.
(Figure 153).
(Figure 250), but only if the master key has already
18
Master keys
541