Brocade Communications Systems Brocade 8/12c User Manual page 439

Copying an extended L2 ACL configuration
To copy an extended L2 ACL configuration, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
2. Select the ACL you want to copy in the ACLs table and click Duplicate.
3. Enter a new name for the ACL in the Name field.
4. To edit an existing rule, complete the following steps.
5. To delete a rule, select the rule you want to delete in the ACL Entries table and click the left
Brocade Network Advisor SAN User Manual
53-1002167-01
The Device_Name - L2 ACL Configuration dialog box displays.
The Duplicate - L2 ACL Configuration dialog box displays with the default name 'Copy of
Original_Name'.
a. Select the rule you want to edit in the ACL Entries table and click the left arrow button.
b. Change sequence number for the ACL in the Sequence field.
c. Select Permit or Deny from the Action list.
d. In the Source list, select one of the following options:
•
Any
•
Host
•
MAC
Selecting MAC or Host enables the Source field. Enter the source address on which the
configuration filters traffic in the Source field.
e. In the Destination Address list, select one of the following options:
•
Any
•
Host
•
MAC
Selecting MAC or Host enables the Destination field. Enter the destination address on
which the configuration filters traffic in the Destination field.
f. Select the Count check box to enable counting.
Count specifies the number of packets filtered (allowed or denied) for the ACL rule.
g. Select the Ether Type check box to specify the Ethernet protocol.
h. In the Ether Type list, select one of the following to specify the Ethernet type being
transferred in the Ethernet frame:
•
ARP—Address Resolution Protocol
•
FCoE—Fibre Channel over Ethernet
•
IPV4-—Internet Protocol, version 4
•
Custom—enter a custom protocol. Valid values are 1536 through 65535.
i. Click the right arrow button.
The updated ACL entry displays in the ACL Entries table. To update additional ACL entries,
repeat step 4.
arrow button.
Layer 2 access control list management
15
395