Brocade Communications Systems Brocade 8/12c User Manual page 407

4. Click the Add button under the Available Rule list.
5. Keep the Rule ID number as it is, or change the number using a value between 1 through 256.
6. Select a rule type. Valid rule types are MAC (MAC address-based rule) and Proto (802.1Q
7.
8. Select an encapsulation type from the list. Options include Ethv2, nosnapllc, and snapllc.
Brocade Network Advisor SAN User Manual
53-1002167-01
FIGURE 129
Edit Switch dialog box, VLAN Classifiers tab
The Add Rules dialog box displays, as shown in
FIGURE 130
Add Rules dialog box
The Rule ID field is pre-populated with the next available Rule ID number.
protocol-based rule).
If Ethernet Type is selected as the Protocol rule type, enter any valid four-digit hexadecimal
value within the allowed range of 0x0000 through 0xFFFF. For the other Proto options, the hex
ID value is hard-coded as follows:
•
ARP—0x0808
•
IP—0x8881
•
IPv6—0x86DD
Encap only accepts a value when Protocol is selected as the rule type.
VLAN classifier configuration
Figure 130.
14
363