Brocade Communications Systems Brocade 8/12c User Manual page 371

Enabling the FAWWN feature on a switch or AG ports
1. Select Configure > Fabric Assigned WWN.
2. Select a switch port from the Fabric Assigned WWN - Configuration list.
3. Click the Enable button.
4. Click OK.
5. Click Start to save the changes to the switch.
6. Click Close on the Fabric Assigned WWN Configuration dialog box.
Disabling the fabric assigned WWN feature on a switch or AG port
1. Select Configure > Fabric Assigned WWN.
2. Select a switch port from the Fabric Assigned WWN - Configuration list.
3. Click the Disable button.
4. Click OK.
Auto-assigning a switch or AG port 's fabric assigned WWN
1. Select Configure > Fabric Assigned WWN.
2. Select a switch port or AG port from the Fabric Assigned WWN - Configuration list.
3. Click the User button.
4. Enter a valid world wide name on the selected switch.
5. Click OK.
Brocade Network Advisor SAN User Manual
53-1002167-01
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
The selected switch's Port status is enabled.
The Fabric Assigned WWN Confirmation and Status dialog box displays.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
The selected switch's FAWWN feature status is disabled.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
The systems sets the type to User and the Fabric Assigned WWN column cells are now
editable.
Adapter port WWN virtualization
13
327