Starting All Services; Restarting All Services - Brocade Communications Systems Brocade 8/12c User Manual

9
Services

Starting all services

NOTE
The Start button restarts running services in addition to starting stopped services which causes
client-server disconnect.
To start all services, complete the following steps.
1. Launch the Server Management Console.
2. Click the Services tab.
3. Click Start to start all services.
4. Click Close to close the Server Management Console.

Restarting all services

To stop and restart all services, complete the following steps.
1. Launch the Server Management Console.
2. Click the Services tab.
3. Click Restart to stop then restart all services.
4. Click Close to close the Server Management Console.
216
NOTE
If the server is configured to use an external FTP server, the Server Management Console does
not attempt to start the built-in FTP service.
NOTE
If the server is configured to use an external FTP server, the Server Management Console does
not attempt to start the built-in FTP service.
Brocade Network Advisor SAN User Manual
53-1002167-01