Brocade Communications Systems Brocade 8/12c User Manual page 141

FIGURE 39
Brocade Network Advisor SAN User Manual
53-1002167-01
Options dialog box (Flyovers option, Product tab)
a. Select each property you want to display in the product flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
Fibre Channel (default)
•
Name
•
Device Type
•
WWN
•
IP Address
•
Domain ID
•
Class
•
Tag#
•
Serial #
•
Vendor
•
Model #
•
Port Count
•
Seed Switch
IP
•
Display Name
b. Click the right arrow to move the selected properties to the Selected Properties table.
c. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table, if necessary.
The properties displayed in the Selected Properties table appear in the flyover display.
Flyovers
•
Firmware
•
Location
•
Contact
•
Description
•
Management Link
•
Operational Status
•
Enclosure
•
Reason
•
FID
•
Base Fabric for Transport
•
Base Switch
•
Zone Alias
•
IP Address
4
97