Chapter 9
[2]
[3]
F-9-30
9.3.4 Image Processor PCB
9.3.4.1 Removing the Rear
Cover
1) Remove the screw [1], and detach the left cover [2].
2) Remove the 13 screws [3], and detach the rear
cover [4].
[3]
[3]
[4]
[3]
F-9-31
9.3.4.2 Removing the Printer
Controller PCB
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the printer
controller PCB [3].
9-16
[1]
[2]
0006-2891
[1]
[2]
0006-3169
[1]
F-9-32
9.3.4.3 Removing the Image
Processor PCB
1) Remove the retainer for the flexible cable used to
connect the analog processor PCB and the image
processor PCB.
2) Remove the core, and disconnect all connectors
from the image processor PCB [1].
3) Remove the 6 screws [2], and detach the image
processor PCB [1].
[2]
[2]
F-9-33
For installation, fasten the core to the upper position
with the part [1] and fix the cable with the part [2].
[2]
[3]
[2]
0006-2892
[2]
[2]
[1]
[2]