Installing The Ne Controller; Installing The Ne Controller-A1/Ne Controller-B1/Copy Data Controller-A1 - Canon ImageRunner iR8500 Series Service Manual

Chapter 2

2.6 Installing the NE Controller

2.6.1 Installing the NE Controller-A1/NE Controller-B1/Copy Data Controller-A1

/ iR8070
Here, the instructions are limited to installation to the copier. For how to make various settings, checks to make, and points to note, see the Installation
Procedure that comes with a specific controller.
1) Remove the 4 screws [1] that come with the rear cover of the host machine, and remove the face cover [2].
2) Connect the connector J525 [1] of the host machine with the cable [3] of the controller.
3) Mount the controller [2] with 4 screws [1].
2-72
[2]
[1]
[1]
F-2-255
[2]
F-2-256
[1]
[1]
0007-2650