Original Size Sensor; Before Removing The Original Size Sensor; Removing The Original Size Sensor - Canon imageRUNNER 5065 series Service Manual

3) Detach the home position sensor [1].
- 1 Connector [1]
[1]
[2]
4) Detach the home position sensor [2].
- Hook [1]
[1]

5.4.11 Original Size Sensor

5.4.11.1 Before Removing the Original Size Sensor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the copyboard glass.(page
Copyboard Glass]

5.4.11.2 Removing the original size sensor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the CCD unit cover [2].
- 9 Screw [1]
[1]
[2]
F-5-75
[3]
F-5-76
[2]
[1]
F-5-77
5-17)Reference[Removing the
2) Shift the original size sensor unit [2].
- 3 Screw [1]
0015-4842
3) Detach the original size sensor unit [2].
- 1 Connector [1]
0015-4845
4) While freeing the claw at the edge, remove the original size sensor [1].
[1]
[1]
[2]
F-5-78
[1]
F-5-79
[2]
[1]
F-5-80
2]
1]
F-5-81
Chapter 5
5-23