Hiding The Screen Display - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Executing Measurements and Displaying Results

Hiding the Screen Display

Hiding the Screen Display
The screen display of measurement results, softkey menu and instrument status can be
hidden with only the menu bar left visible on the screen. If you hide the screen display, it is
not updated; this allows you to minimize measurement time. See Table 7-2 on page 168 for
the times required to complete each task under different screen conditions.
NOTE
For how to perform the instruction "press the key (softkey) in the softkey menu"
mentioned in the procedure, see "13. Softkeys" on page 87.
Step 1. Press the
Step 2. Press the
setting toggles with each press of the button).
NOTE
If the screen display is turned off, the softkey menu is not visible. To return the screen
display to ON, use the mouse to select
You can alternately press the
the preset condition (in the preset condition, the screen display is ON).
Figure 7-5 View when screen display is turned off
166
key on the front panel to display the Display softkey menu.
[Display]
key in the softkey menu to turn the screen display ON or OFF (the
Display [ ]
Softkey Label
DISPLAY [ON]
DISPLAY [OFF]
4. Display - 4. DISPLAY [OFF]
key on the front panel to return the 4287A settings to
[Preset]
Screen Display Status
ON
OFF
from the menu bar.
Chapter 7