To Print Or Plot Screen Contents - Agilent Technologies 89410A Getting Started Manual

General Tasks

To print or plot screen contents

1
Set up your printer or plotter if you haven't already done so.
2
Select the output format and device type:
Press [ ], [
Plot/Print output fmt
Press [ ] and select a device if you want other than the default.
device defaults
3
Select the type of output port:
Press [ ], [
Plot/Print output to
and select the port to which your printer or plotter is attached.
4
Press [ ], [
Local/Setup system controller
5
Press [ ], [
Plot/Print start plot/print
The analyzer is only able to initiate printing or plotting if it is attached to a
printer or plotter and is designated as the system controller. If you haven't
already set up your printer or plotter, see "To set up peripherals." All of the
screen's contents, except the softkey labels, are printed when you complete this
task.
You may select various parameters under the [
depending on your particular peripheral. To learn more about these
parameters, display online help for the relevant softkeys.
You must use the PLOT/PRINT menu to select the correct type of
device and port before starting a plot or print of the screen contents.
] and select the desired format.
]
].
]
plot item
] and [ ] softkeys
plot/print setup
With a plotter, you can
elect to plot portions of
the display
You can control certain
device options, depending on
your output device
6 - 3