Table of Contents
Advertisement
Storing, Logging and Printing
Cleaning Internal Printer Print Head
Cleaning Internal Printer Print Head
Description
The print head should be cleaned when broken or light characters occur in a vertical
line on the page. To maintain a high quality print, clean the print head after 200 to
300 prints.
The print head is cleaned with a special cleaning paper which is supplied with the
instrument.
WA RN IN G
The paper tear-off edge is SHARP. This edge is exposed when the printer cover
is raised. Note the
HOW TO:
1 Open the printer as for changing the paper see "Changing Internal Printer Paper"
page 273.
If printer paper is fitted, remove it from the printer.
2 Feed the cleaning paper into the top entry of the print mechanism with the rough
black side, which contains the cleaning material, towards the rear of the printer.
3 When the automatic feed is complete and the paper stops moving use the
instrument front panel key
the print mechanism.
4 Remove the cleaning paper and replace the normal printer paper. See "Changing
Internal Printer Paper " page 273.
N O T E
Retain the cleaning paper. It is designed to last for the life of the printer.
276
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CAUTION SHARP EDGE label on the cover.
!
to move the cleaning paper through
PAPER FEED
Advertisement
Table of Contents
