VvtÃXv
rTpr
Q
vvtÃGhiry
Printing Labels
Printing Labels On Site
2−12
The WireScope 350 can print labels directly to a Brady TLS2200 label
printer. The labeling parameters are set using the procedure Choosing
the Labeling Format, on page 3-6. When the WireScope is configured as
described in the following procedure, a label for the tested cable will be
printed after saving a test result.
To configure the WireScope 350 to print to the Brady label printer:
1 On the Main Menu, press System. The System Settings screen
displays.
2 On the System Settings screen, press Autoprint, then Edit. The
Printer Setup screen displays.
3 Press Autoprint to enable the Autoprint function. A checkmark
shows that the function is enabled.