Config Ipxsap Delete Vlan - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands

config ipxsap delete vlan

config ipxsap delete vlan [<vlan name> | all]
Description
Disables IPX/SAP on an interface.
Syntax Description
vlan name
all
Default
N/A.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is
enabled by default when the IPX VLAN is configured.
Example
The following command disables IPX/SAP on VLAN
config ipxsap delete vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
1196
Specifies a VLAN name.
Specifies all VLANs.
accounting
:
ExtremeWare Software 7.0.0 Command Reference Guide