Viewing Port Details - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Resetting the filter
Reset immediately clears all existing definitions. You cannot cancel the reset.
To reset the Filter dialog box, complete the following steps.
1. Click the Filter link from the Port Connectivity View dialog box.
2. Click Reset.
Enabling the filter
To enable the filter, select the Filter check box.
Disabling the filter
To disable the filter, clear the Filter check box.

Viewing port details

To view port details, complete the following steps.
1. Right-click the port for which you want to view more detailed information on the Port
FIGURE 93
2. Review the port information.
3. Sort the results by clicking on the column header.
4. Rearrange the columns by dragging and dropping the column header.
5. Click the close (X) button to close this dialog box.
DCFM Enterprise User Manual
53-1001775-01
The Filter dialog box displays.
All existing definitions are cleared automatically. You cannot cancel the reset.
Connectivity View dialog box and select Show Details.
The Port Details dialog box
Port Details dialog box
For the list of fields on the Port Details dialog box, refer to
displays(Figure 91).
Viewing port details
Table 13 on page 213.
8
211