Displaying Lag Information; Displaying Vlan Information; Displaying Fcoe Login Groups; Displaying Qos Information - Brocade Communications Systems SN3000B Administrator's Manual

Displaying LAG information

To display LAG information, perform the following steps.
1. Select the DCB tab on the Switch Administration panel.
2. Select the Link Aggregation tab.

Displaying VLAN information

To display VLAN information, perform the following steps.
1. Select the DCB tab on the Switch Administration panel.
2. Select the VLAN tab.

Displaying FCoE login groups

To display FCoE login group information, perform the following steps.
1. Select the DCB tab on the Switch Administration panel.
2. Select the FCoE Login tab.

Displaying QoS information

To display QoS information, perform the following steps.
1. Select the DCB tab on the Switch Administration panel.
2. Select the QoS tab.
Web Tools Adminstrator's Guide
53-1002152-01
•
Connected Peer Type displays the port type on the connected device.
•
Is Directly Connected indicates whether or not the device is directly connected to the
trunk.
•
FCoE Port MAC displays the FCoE port MAC address.
•
Switch Port displays the switch port WWN.
The LAG information displays.
The VLAN information displays.
The FC0E login group information displays.
From the QoS tab, you can select the DCB Map tab to display DCB map information, or select
the Traffic Class Map tab to display traffic class maps information.

Displaying LAG information

18
239