Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
•
The more specific commands override the settings of the less specific commands. For example, if you
use the
still use the
The CMTS assigns the MAX Host value to a cable modem at the time that the cable modem registers
Note
with the CMTS. Changing any of the MAX Host commands affects only cable modems that register after
the change.
Tip
For more information on how these commands interact to set the maximum CPE values, see the chapter
Maximum CPE or Host Parameters for the Cisco Cable Modem Termination System in the
Cisco CMTS Feature Guide, available on Cisco.com and the Documentation CD-ROM.
The "Number of CPES" field in the
Note
the CM, not the value for the CMTS that is set by the
Related Commands
Command
cable max-hosts
cable modem access-
group
cable modem change-
frequency
cable modem max-
hosts
cable modem qos
profile
show cable modem
OL-1581-08
cable modem
max-cpe—Sets the maximum number of hosts for all CMs using the Cisco CMTS
router.
cable modem max-cpe
cable modem max-hosts
Description
Sets the maximum number of hosts for all CMs on a particular cable
interface.
Specifies an access group for a CM.
Changes the downstream frequency or upstream channel ID.
Sets the maximum number of hosts for a particular CM.
Specifies the QoS profile for a CM.
Displays CM configuration settings.
command to set the maximum number of hosts to 2 for all CMs, you can
command to give a particular CM a larger maximum host value.
show cable modem
command shows the maximum CPE value for
cable modem max-cpe
Cisco Broadband Cable Command Reference Guide
cable modem max-cpe
command.
2-157
Advertisement
Table of Contents
