Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
cable modulation-profile
To define a modulation profile for use on the router, use the cable modulation-profile command in
global configuration mode. To remove the entire modulation profile or to reset a default profile to its
default values, use the no form of this command.
DOCSIS 1.0 and 1.1 Mixed Mode:
DOCSIS 1.x/2.0 Mixed Mode:
DOCSIS 2.0 A-TDMA Mode:
OL-1581-08
cable modulation-profile profile {mix | qam-16 | qpsk | robust-mix}
no cable modulation-profile profile {iuc | mix | qam-16 | qpsk | robust-mix }
cable modulation-profile profile iuc fec-tbytes fec-len burst-len guard-t mod scrambler seed diff
pre-len last-cw uw-len
cable modulation-profile profile {mix-high | mix-low | mix-mid | mix-qam | qam-16 | qpsk |
robust-mix-high | robust-mix-mid | robust-mix-qam}
no cable modulation-profile profile {iuc | mix-high | mix-low | mix-mid | mix-qam | qam-16 |
qpsk | robust-mix-high | robust-mix-mid | robust-mix-qam}
cable modulation-profile profile iuc fec-tbytes fec-len burst-len guard-t mod scrambler seed diff
pre-len last-cw uw-len
cable modulation-profile profile {mix-high | mix-low | mix-mid | mix-qam | qam-8 | qam-16 |
qam-32 | qam-64 | qpsk | robust-mix-high | robust-mix-low | robust-mix-mid}
no cable modulation-profile profile {iuc | mix-high | mix-low | mix-mid | mix-qam | qam-8 |
qam-16 | qam-32 | qam-64 | qpsk | robust-mix-high | robust-mix-low | robust-mix-mid}
cable modulation-profile profile iuc fec-tbytes fec-len burst-len guard-t mod scrambler seed diff
pre-len last-cw uw-len
Cisco Broadband Cable Command Reference Guide
cable modulation-profile
2-167
Advertisement
Table of Contents
