Ring on Transfer (#119)
Description
This System Programming procedure lets you specify what callers hear while
they are being transferred. If Ring on Transfer is set to Active, callers hear
ringing as they are being transferred; it it is set to Not Active, callers hear
silence unless Music On Hold is activated and an audio source is connected to
the primary processor module. If this is the case, callers hear music while the
call is being transferred to the destination extension. Once there, callers hear
ringing until the call is answered or it is sent to the voice messaging system.
Related Features
If you have an audio source connected to the primary processor module, set
Music On Hold (#602) to Active and Ring on Transfer to Not Active, so
callers hear music as they are being transferred to the destination extension.
This procedure has no effect on Direct Extension Dial or Call Park.
Valid Entries
1 = Active
2 = Not Active
Programming
To change Ring on Transfer
Press [
1.
Feature
2.
Press [
3.
Select another procedure or exit programming mode.
] [
] [
] [
0
0
System Program
] until the appropriate value displays.
Next Data
] [
] [
] [
] [
] [
System Program
#
1
1
Ring on Transfer (#119)
].
9
5-163