Table of Contents
Advertisement
Converting Immediate Transmission to Memory
Transmission
If there is a message still waiting in the document feeder which has been
programmed and is awaiting transmission, you can convert it into a memory
file if you press the Memory key then Start key. The document will be
scanned and stored into memory, leaving the document feeder free for
others to use.
Memory Transmission as Your First Choice
The default mode of your machine is Immediate Transmission. If you wish,
you can change this home position to Memory Transmission.The procedure
is as follows. If you need more information about the User Parameter
Settings adjustment procedure, see page 166.
Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
At this time, you can print a User Parameter
List, if you press the
Press the Yes key. The settings for
Switch 00 are now shown in the display.
The setting that you need to change is
that for digit 6.
If you wish to change the setting, press
6 using the ten keypad.
Finish: Press the Yes key, then press
the Function key.
CHANGING TRANSMISSION MODE
key and the Start key.
j
SETTING?
PRINT LIST
j
KPAD/Y/
SWITCH 00: 0000 0000
KPAD/Y/
SWITCH 00: 0100 0000
Digit 6
0: Memory Transmission
1: Immediate Transmission
Y/
j
j k
j k
27
Advertisement
Table of Contents
