Memory Transmission And Immediate Transmission; Memory Transmission (Memory Indicator Lit) - Ricoh FAX2900L Operator's Manual

Memory Transmission And Immediate
Transmission
G4 user please seeP.182 "Transmission Procedure".
There are two ways to send a fax mes-
sage.
• Immediate Transmission
• Memory Transmission
Memory Transmission
(Memory Indicator Lit)
Memory Transmission is convenient
because:
• Fax messages can be scanned
much more quickly (you can take
your document away from the fax
machine without
long).
• While your fax message is being
sent, another user can operate the
machine (people will not have to
wait by the fax machine too long).
• You can send the same message to
more than one place with the same
operation.
• There are two kinds of Memory
Transmission: Parallel and Nor-
mal. Parallel Memory Transmis-
sion is the default.
Note
If your document gets stuck while
it is being processed, press the
{Stop} key, and turn to P.140
"Clearing a Document Jam" for in-
structions on how to safely remove
the original.
A
Make sure that the machine is in
standby mode for faxing.
The display should look like this:

Memory Transmission And Immediate Transmission

B
waiting too
READY 100% 10:00
SET DOC. OR DIAL NO.
Note
If the display is blank, press the
Energy Saver key to exit Energy
Saving mode.
Fan your document stack (at most
2
30 pages: 80 g/m to make sure all
pages are loose, then square it.
Note
All pages in your document
must be one-sided and be of the
same size.
4
17