Danfoss iC7 Series Application Manual page 54

Application Guide | iC7 Series Industry
Table 12: Datalogger Settings Fields
Field name
File name
Overwrite
Next file number
Trigger mode
54 | © 2024.05
(continued)
Field description
Name of the file for datalogger recording.
To turn the overwrite function on or off, click the Overwrite-
toggle button.
• On: Overwrite is enabled. A file number is not appended
to the data log file. Instead, the datalogger overwrites a
previous datalog file.
• Off: Overwrite is disabled. A file number is appended
to the log file. For each datalog, the datalog file is
incremented and the previous datalog file is not
overwritten.
The number entered in this field is appended to the initial
datalog file. Entry in the field is useful when datalogs are
previously available in the drive. The number is auto-incre-
mented with each datalog recording when the entry in Next
file number is enabled.
Select 1 of the following trigger modes:
• Single: After a datalog recording, the datalogger must be
rearmed before another trigger is allowed.
• Auto: After a datalog recording, the datalogger
automatically rearms and starts to accept triggers.
AB480436531518en-000601 / 136R0283
User Interfaces