Danfoss iC7 Series Application Manual page 277

Application Guide | iC7 Series Industry
Selection Number Selection Name
0 PC control
1 Local control
2 Fieldbus control
3 I/O control
4 Advanced control
P 5.5.1.2 Local Control Active Output
Select an output terminal indicating that the drive is in local control.
Default Value: –
Parameter 5178
Number:
Data Type:
UINT
P 5.5.1.3 Fieldbus Control Active Output
Select an output terminal indicating that the drive is in fieldbus control.
Default Value: –
Parameter 5197
Number:
Data Type: UINT
P 5.5.1.4 I/O Control Active Output
Select an output terminal indicating that the drive is in I/O control.
Default Value: –
Parameter
5177
Number:
Data Type: UINT
P 5.5.1.5 Advanced Control Active Output
Select an output terminal indicating that the drive is in advanced control.
Default Value:
–
Parameter 4727
Number:
Data Type: UINT
Speed Control Status (Menu Index 5.8.1)
6.7.2.9
P 5.8.1.2 Motor Speed
© 2024.05
Selection Description
The drive is controlled by a software tool.
The drive is controlled by a connected control panel.
The drive is controlled via a fieldbus.
The drive is controlled via I/O.
The drive is controlled via a combination of I/O and fieldbus.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
277