Danfoss iC7 Series Application Manual page 150

Application Guide | iC7 Series Industry
Select the response for exceeding the limit.
Default Value:
9 (Fault, ramp to coast)
Parameter 5225
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
3 Warning
9 Fault, ramp to coast
10 Fault
Temp. 6 Protection (Menu Index 5.2.3.7)
6.6.3.3.7
P 5.2.3.7.1 Temp. 6 Input
Select the temperature sensor input for the temperature protection.
Default Value:
–
Parameter 5226
Number:
Data Type:
UINT
P 5.2.3.7.2 Temp. 6 Limit 1
Set the temperature level for issuing a warning.
Default Value:
120
Parameter 5227
Number:
Data Type: REAL
P 5.2.3.7.3 Temp. 6 Limit 2
Set the temperature level for issuing a protection response.
Default Value: 150
Parameter 5228
Number:
Data Type: REAL
P 5.2.3.7.4 Temp. 6 Limit 2 Response
Select the response for exceeding the limit.
Default Value: 9 (Fault, ramp to coast)
150 | © 2024.05
Parameter Type:
Unit:
Access Type:
Selection Description
The drive issues a warning.
Issues a fault, ramps down, and coast.
The drive issues a fault and coasts the motor.
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Parameter Descriptions
Selection
–
Read/Write
Selection
–
Read/Write
Range (-300 — 300)
°C
Read/Write
Range (-300 — 300)
°C
Read/Write
Selection
AB480436531518en-000601 / 136R0283