Danfoss iC7 Series Application Manual page 316

Application Guide | iC7 Series Industry
Table 55: I/O Digital Output Status Bits
Bit
00–01
02
03
04–11
12
13
14–15
P 9.3.3 T31 Analog Output Value
Description: Shows the actual value of the terminal.
Default Value: NA
Unit: -
P 9.3.4 T33 Analog Input Value
Description: Shows the actual value of the terminal.
Default Value: NA
Unit: -
P 9.3.5 T34 Analog Input Value
Description: Shows the actual value of the terminal.
Default Value: NA
Unit: -
P 9.3.6 T34 Temperature Value
Description: Shows the measured temperature of the terminal.
Default Value: NA
Unit: °C
Digital Inputs/Outputs (Menu Index 9.4)
6.10.2.2
Pulse Input
6.10.2.2.1
A digital input can be configured to be a pulse input with the corresponding mode parameter. The pulse input can be used as a speed
reference, similarly to how an analog input signal works. The pulse input can come from a sensor, an HTL encoder, or other devices.
316 | © 2024.05
Description
Not used
DigOut15
DigOut16
Not used
Relay02
Relay05
Not used
Parameter Type: Range (0 — 20)
Data Type: REAL
Parameter Type: Range (-20 — 20)
Data Type: REAL
Parameter Type: Range (-20 — 20)
Data Type: REAL
Parameter Type: Range (-1000 — 1000)
Data Type: REAL
Parameter Descriptions
Parameter Number: 1613
Access Type: Read Only
Parameter Number: 1611
Access Type: Read Only
Parameter Number: 1612
Access Type: Read Only
Parameter Number: 1616
Access Type: Read Only
AB480436531518en-000601 / 136R0283