Danfoss iC7 Series Application Manual page 216

Application Guide | iC7 Series Industry
Set the bypass hysteresis speed band, high limit.
Default Value:
Parameter Type:
Parameter 4523
Number:
Data Type: REAL
P 5.8.8.5 Band 3, Low Limit
Set the bypass hysteresis speed band, low limit.
Default Value: Parameter Type:
Parameter
4524
Number:
Data Type: REAL
P 5.8.8.6 Band 3, High Limit
Set the bypass hysteresis speed band, high limit.
Default Value:
Parameter Type:
Parameter 4525
Number:
Data Type:
REAL
P 5.8.8.7 Band 4, Low Limit
Set the bypass hysteresis speed band, low limit.
Default Value: Parameter Type:
Parameter 4526
Number:
Data Type: REAL
P 5.8.8.8 Band 4, High Limit
Set the bypass hysteresis speed band, high limit.
Default Value: Parameter Type:
Parameter 4527
Number:
Data Type:
REAL
Load Drooping (Menu Index 5.8.9)
6.6.9.10
P 5.8.9.1 Load Drooping Mode
Select the load drooping mode - Only available in FVC+ mode.
Default Value: 0 (Static)
216 | © 2024.05
Range (0 — 100)
Unit:
Access Type:
Range (0 — 100)
Unit:
Access Type:
Range (0 — 100)
Unit:
Access Type:
Range (0 — 100)
Unit:
Access Type:
Range (0 — 100)
Unit:
Access Type:
Parameter Type:
Parameter Descriptions
Hz
Read/Write
Hz
Read/Write
Hz
Read/Write
Hz
Read/Write
Hz
Read/Write
Selection
AB480436531518en-000601 / 136R0283