Restoring The System Configuration Using The Control Panel - Danfoss iC7 Series Application Manual

Application Guide | iC7 Series Industry
Press
or
Backup
Figure 14: Start Backup
4. Press [Right arrow] to start the backup process.
5.
Select the storage place for the backup file.
Select backup destination
Flash
RAM
Backup
Figure 15: Select Backup Destination
6.
Press [Right arrow] and wait until the operation is completed.
Completed
Flash backup is completed.
Press OK to exit.
Backup
Figure 16: Backup Completed
7. To exit press [OK].

Restoring the System Configuration Using the Control Panel

3.2.13.2
Restore the system configuration from a backup file or to default factory settings using the control panel
1. Press the [Home/Menu] button to enter the main menu.
2.
Navigate to Backup & Restore.
–
Select Setup & Service > Backup & Restore.
– Select Setup & Service > All Parameters > Backup & Restore (Menu Index 6.7).
3.
Select Restore.
42 | © 2024.05
Start
to start
to exit.
User Interfaces
AB480436531518en-000601 / 136R0283