Danfoss iC7 Series Application Manual page 313

Application Guide | iC7 Series Industry
Selection Number Selection Name
9007 Feedback Speed
9044 DC-link Voltage
9041 Grid Frequency
9040 Line-To-Line Voltage (RMS)
9048 L1-L2 Line Voltage (RMS)
9049 L2-L3 Line Voltage (RMS)
9050 L3-L1 Line Voltage (RMS)
9047 Grid Voltage Imbalance
Date & Time (Menu Index 8.4)
6.9.5
P 8.4.1 Time Mode
Select the time mode. Auto will enable NTP.
Default Value: 1 (Auto (NTP))
Parameter 6232
Number:
Data Type:
USINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Manual
1 Auto (NTP)
P 8.4.2 Date and Time
Set the actual time and date. Format is YYYY-MM-DD and HH:MM:SS.
Default Value: Parameter Type:
Parameter
2800
Number:
Data Type: DATE_AND_TIME
P 8.4.3 NTP Server 1
Set the IPv4 address of the requested NTP server 1.
Default Value:
Parameter Type:
Parameter 6233
Number:
© 2024.05
Selection Description
Shows the feedback speed.
Shows the actual DC-link voltage.
Shows the actual grid frequency.
Shows the average line-to-line voltage (RMS).
Shows the L1-L2 line voltage (RMS).
Shows the L2-L3 line voltage (RMS).
Shows the L3-L1 line voltage (RMS).
Shows the grid voltage imbalance in %. A value greater than 3%
may indicate grid problems.
Parameter Type:
Unit:
Access Type:
Selection Description
Disables NTP.
Range (\* — \*)
Unit:
Access Type:
Range (\* — \*)
Unit:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Selection
–
Read/Write
–
Read/Write
–
313