Induction Motor (Menu Index 4.2.3) - Danfoss iC7 Series Application Manual

Application Guide | iC7 Series Industry
Set the nominal motor current.
Default Value:
11.5
Parameter 400
Number:
Data Type: REAL
P 4.2.2.3 Nominal Speed
Set the nominal motor shaft speed.
Default Value: 1450
Parameter
402
Number:
Data Type: REAL
P 4.2.2.4 Nominal Frequency
Set the nominal motor frequency.
Default Value:
50
Parameter 403
Number:
Data Type:
REAL
P 4.2.2.5 Nominal Voltage
Set the nominal motor voltage.
Default Value: 400
Parameter 401
Number:
Data Type: REAL
P 4.2.2.6 Nominal Torque
Set the nominal torque from the nameplate of the motor.
Default Value: 52521.13
Parameter 9951
Number:
Data Type:
REAL

Induction Motor (Menu Index 4.2.3)

6.5.3.3
P 4.2.3.1 Stator Resistance Rs
Set the motor stator resistance. Overwritten by AMA.
Default Value: 1.21
118 | © 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Parameter Descriptions
Range (\* — \*)
A
Read/Conditional Write
Range (0 — 100000)
rpm
Read/Conditional Write
Range (0 — 2000)
Hz
Read/Conditional Write
Range (\* — \*)
V
Read/Conditional Write
Range (\* — \*)
NomTorqueSI
Read/Conditional Write
Range (0 — 1000000)
AB480436531518en-000601 / 136R0283