Danfoss iC7 Series Application Manual page 162

Application Guide | iC7 Series Industry
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Allow Local Control
1 Deny Local Start
2 Deny Local Control
P 5.5.3.1.3 Continue Operation in Local Control
Enables running state when changing to local control.
Default Value: 1 (Enabled)
Parameter
108
Number:
Data Type: BOOL
The following are the selections for the parameter.
Selection Number Selection Name
0 Disabled
1 Enabled
P 5.5.3.1.4 Local Control Stop Button Action
Select the action of the stop button in the control panel. Selecting 'Stop, Hold to Coast' will stop and coast if the stop button is pressed
for 2 s.
Default Value: 2 (Stop, Hold to Coast)
Parameter
110
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Stop
1 Coast Stop
2 Stop, Hold to Coast
6.6.6.4.2 References (Menu Index 5.5.3.2)
P 5.5.3.2.1 Local Speed Reference Source
162 | © 2024.05
Access Type:
Selection Description
Local mode from control panel is enabled.
Start in local mode from control panel is disabled.
Local mode from control panel is disabled.
Parameter Type:
Unit:
Access Type:
Selection Description
Disables the function.
Enables the function.
Parameter Type:
Unit:
Access Type:
Selection Description
Push stop button to stop the motor.
Push stop button to coast the motor.
Push stop button to stop. If pressed for 2 s, motor coasts.
Parameter Descriptions
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
AB480436531518en-000601 / 136R0283