Inertia (Menu Index 5.3.2); Torque & Aeo (Menu Index 5.3.3) - Danfoss iC7 Series Application Manual

Application Guide | iC7 Series Industry

Inertia (Menu Index 5.3.2)

6.6.4.2
P 5.3.2.1 Inertia Estimation Mode
Set the mode for the intertia estimation.
Default Value: 0 (Off)
Parameter
668
Number:
Data Type:
UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Off
1 Without load profile
2 With load profile
P 5.3.2.2 Inertia Estimation Timeout
Set the time after which an event message will be generated if inertia estimation cannot be finalized.
Default Value: 900
Parameter 669
Number:
Data Type:
REAL
P 5.3.2.3 System Inertia
Set the system inertia.
Default Value: Parameter Type:
Parameter 667
Number:
Data Type: REAL
Torque & AEO (Menu Index 5.3.3)
6.6.4.3
P 5.3.3.1 Torque Characteristic
Select the torque characteristics matching the application needs.
Default Value: 0 (Constant torque (CT))
Parameter
2809
Number:
Data Type: UINT
© 2024.05
Parameter Type:
Unit:
Access Type:
Selection Description
The feature is disabled.
The next start command intiates a test sequence - Without speed
dependent load.
The next start command initiates a test sequence - With speed
dependent load.
Parameter Type:
Unit:
Access Type:
Range (0 — 10000)
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
AB480436531518en-000601 / 136R0283 |
Parameter Descriptions
Selection
–
Read/Conditional Write
Range (120 — 1800)
s
Read/Write
kgm²
Read/Write
Selection
–
Read/Write
155