Danfoss iC7 Series Application Manual page 242

Application Guide | iC7 Series Industry
Select the input or a predefined fixed value for the feedback.
Default Value:
–
Parameter 6027
Number:
Data Type: UINT
P 5.10.4.6 Feedback 1 Conversion
Select a conversion function for the feedback.
Default Value: 0 (Linear)
Parameter
6009
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Linear
1 Quadratic
P 5.10.4.7 Feedback 2 Type
Select the type of feedback.
Default Value: 0 (Feedback disabled)
Parameter 6022
Number:
Data Type: UINT
The following are the selections for the parameter.
Selection Number Selection Name
0 Feedback disabled
1 Analog Feedback Terminal
2 Fieldbus Feedback
P 5.10.4.8 Feedback 2 Maximum Scaling
Set the maximum scaling value of the feedback.
Default Value: 100
Parameter
6017
Number:
242 | © 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Selection Description
The fieldbus reference will be scaled linearly.
The fieldbus reference will be scaled quadraticaly (ref^2).
Parameter Type:
Unit:
Access Type:
Selection Description
Use feedback value from the analog input.
Use feedback value from the fieldbus.
Parameter Type:
Unit:
Parameter Descriptions
Selection
–
Read/Write
Selection
–
Read/Write
Selection
–
Read/Write
Range (-1000000 — 1000000)
CustomProcessUnit
AB480436531518en-000601 / 136R0283