Danfoss iC7 Series Application Manual page 280

Application Guide | iC7 Series Industry
Selection lists with inputs and/or outputs consist of the name of the hardware option and the numbers of the
NOTE:
terminals. For example, terminal number 13 of the Basic I/O is called Basic I/O T13 in the selection list.
P 5.8.1.13 Absolute Speed Reference Output
Select an output terminal for the absolute speed reference, scaled between 0 and positive speed limit.
Default Value: –
Parameter 2304
Number:
Data Type: UINT
Selection lists with inputs and/or outputs consist of the name of the hardware option and the numbers of the
NOTE:
terminals. For example, terminal number 13 of the Basic I/O is called Basic I/O T13 in the selection list.
P 5.8.1.14 Output Frequency Output
Select an output terminal for the output frequency scaled between minimum speed limit and positive speed limits in Hz.
Default Value:
–
Parameter 2308
Number:
Data Type: UINT
Selection lists with inputs and/or outputs consist of the name of the hardware option and the numbers of the
NOTE:
terminals. For example, terminal number 13 of the Basic I/O is called Basic I/O T13 in the selection list.
P 5.8.1.16 Load Drooping Speed
Shows the load drooping speed.
Default Value:
NA
Parameter 674
Number:
Data Type:
REAL
Torque Control Status (Menu Index 5.9.1)
6.7.2.10
P 5.9.1.1 Motor Torque
Shows the actual motor torque.
Default Value: NA
Parameter
9009
Number:
Data Type: REAL
280 | © 2024.05
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Type:
Unit:
Access Type:
Parameter Descriptions
Selection
–
Read/Write
Selection
–
Read/Write
Range (0 — 2000)
Hz
Read Only
Range (-10000000 —
10000000)
Nm
Read Only
AB480436531518en-000601 / 136R0283